Table of Contents
Advertisement
®
Proto-Sound 3.0 features are activated by
sequences of Bell and Horn button pushes
described below. Please read the full
descriptions of each feature before using it.
To use these buttons to activate features
rather than to blow the horn or ring the bell,
you should tap the buttons very quickly with a
½-second pause between button presses. You
may need to practice your timing to make this
work smoothly.
Press
Horn
Short &
Firm
Feature to Be Activated
Road/Push
PFA (Passenger/Freight Announcements)
Fire the Rear Coupler
Fire the Front Coupler
Speed Control On/Off
Lock into a Direction
Road/Pull
Reset to Factory Defaults
The MTH E94 Crocodile has four operating light settings or modes:
• Road
•
Pull
In each of these operating modes the lights follow the actual prototype engine.
To switch between the different modes please follow the instructions below.
ROAD
ENGINE IN FORWARD
By default your engine's lights will look like those above. This is the Road setting. To
toggle between Road and Push service using your AC transformer, follow the Bell/
Whistle instructions below.
½ Sec.
Pause
Total Time Lapse: 1
•
Push
•
Yard
Rear
Premier E94 Crocodile Electric Engine
Figure 10: Manually Adjusting the Volume
Timing Chart
Press
½ Sec.
Bell
Pause
Short &
Firm
½
Seconds
Button Code:
1 Bell, 1 Horn/Whistles
1 Bell, 2 Horn/Whistles
1 Bell, 3 Horn/Whistles
1 Bell, 4 Horn/Whistles
1 Horn/Whistle, 2 Bells (from Neutral only)
1 Horn/Whistle, 3 Bells
1 Horn/Whistle, 4 Bells
1 Horn/Whistle, 5 Bells (from Neutral only)
ENGINE IN REVERSE
Red
PUSH/ROAD
12
Proto-Sound 3.0
Volume Adjustment
Knob
Press
Bell
Short &
Firm
Red
Rear
®
Advertisement
Table of Contents
