Assembling The Deskphone; Powering The Ip Deskphone - Avaya 9601 Installing And Maintaining

Table 1: H.323 to SIP and SIP to H.323 conversion chart (continued)
Environment To convert this
type of
deskphone
H.323-centric H.323 factory set
H.323-centric SIP

Assembling the deskphone

!
CAUTION:
Be careful to use the correct jack when plugging in the deskphone. The jacks are
CAUTION:
located on the back of the deskphone housing and are flanked by icons to
represent their correct use.

Powering the IP deskphone

The 9601, 9608, 9608G, 9611G, 9621G, and 9641G deskphones support IEEE
802.3af-standard LAN-based power. Before installing a 9601, 9608, 9608G, 9611G, 9621G, or
9641G deskphone, verify with the LAN administrator whether the LAN supports IEEE 802.3af,
and if so, whether the deskphone should be powered locally or by means of the LAN.
When you add devices like multiple button modules, all of which must be the same model type,
to applicable IP deskphones, the power class might change.
Note:
The 9601 and 9621G IP deskphones do not support button modules.
Note:
To this Then
type of
deskphone
SIP Connect the deskphone to a power source and to
the network.
Press the Program softkey as soon as it displays
in the first softkey position to access the Craft
Access Code Entry screen. Perform the SIG
Craft procedure and change the value from
"default" to "2" (SIP).
Save the SIG parameter change. The deskphone
will reset if necessary to get the appropriate
software.
H.323 Perform the SIG Craft procedure to change the
SIG parameter value from "2" (SIP) to "default"
(H323). For information, see
protocol identifier
Save the SIG parameter change. The deskphone
will restart if necessary to get the appropriate
software.
Assembling the deskphone
Setting the signaling
on page 58.
Issue 5 August 2014 27