Chapter 2: 9600 Series Ip Deskphones Installation; Introduction; Ip Deskphone Models - Avaya 9601 Installing And Maintaining

Chapter 2: 9600 Series IP Deskphones installation

Introduction

SIP-based 9600 Series IP Deskphones models support DHCP and HTTP/HTTPS over IPv4/
UDP that enhances the administration and servicing of the deskphones. These deskphones use
DHCP to obtain dynamic IP addresses and HTTP or HTTPS to download new software versions
and customized settings.
SIP-based 9600 Series IP Deskphones models provide the ability to have one IP connection on
the desktop for both a deskphone set and a PC using an Ethernet switch.
In compliance with Australian law, the following information is provided:
This equipment shall be installed and maintained by trained service personnel. All the input/
output ports are classified as Safety Extra Low Voltage (SELV, in the meaning of IEC
60950). To maintain safety compliance when connecting the equipment electrically to other
equipment, the interconnecting circuits shall be selected to provide continued conformance
of clause 2.3 for SELV circuits (generally, double/reinforced insulation to 240VAC rms to any
primary/mains circuitry and 120VAC rms to any telecommunications network circuitry). To
ensure that these conditions are adhered to, interconnect the equipment only with the
already approved/certified equipment.

IP deskphone models

There are twelve models currently defined in the 9600 Series IP Deskphones family that run the
SIP protocol. This guide covers only the following deskphone models:
9601
●
9608
●
9608G
●
9611G
●
9621G
●
9641G
●
The deskphones have an internal Ethernet switch that allows the deskphone and a PC to share
the same LAN connection, if appropriate. Thus, 9600 models do not need, or work with, the 30A
switched hub interface. The deskphone models 9608G, 9611G, 9621G and 9641G have a
Gigabit Ethernet (GigE) interface that speeds data transmission.
Issue 5 August 2014 21