Advanced Menu - Eiki EK-800U Owner's Manual

DLP Projector — Owner's Manual

Advanced Menu

Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select PICTURE and press
the Enter button to enter the PICTURE menu. Press the arrow keys (pq) to select Advanced and press
the Enter button to enter the Advanced menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
I
tem
BrilliantColor
TM
White Peaking
Gamma
Color Temperature
Color Space
Color Settings
Color Enhancement
Color Wheel Speed
DynamicBlack
TM
Noise Reduction
Flesh Tone Correction
Video Black Level
Film Mode
PICTURE
BrilliantColor
TM
White Peaking
Gamma
OUTPUT
Color Temperature
Color Space
Color Settings
SETUP
Color Enhancement
Color Wheel Speed
DynamicBlack
TM
OPTION
Noise Reduction
Produce an expanded on-screen color spectrum that delivers enhanced
color saturation for bright, true-to-life images
(Video source only) Increase the brightness of whites that are near 100%.
Select the appropriate gamma from Video, Film, Bright, CRT, and DICOM.
Change the intensity of the colors. Select a listed relative warmth value.
Select a color space that has been specifically tuned for the input signal.
Use only for analog signals and certain digital sources.
Adjust the gain of the red, green, or blue channel of the image. It will affect
the black and white.
Adjust the offset of the red, green, or blue channel of the image. It will affect
the black and white.
Reset RGB gain/offset to return the factory default settings for color
adjustments.
The Color Enhancement control can improve the picture quality of pictures
with a high saturation of color.
Higher speed will reduce the appearance of color artifacts seen by some
people.
Enable or disable the dynamic black function. Enable this function raises
the contrast ratio dynamically.
The motion Adaptive Noise Reduction reduces the amount of visible noise
interlaced signals.
Control the amount of flesh tone correction applied to the image.
Analyze the current input image and calculate an offset value which is then
added to the analog to digital converter black level value. This ensures
optimum black level for each analog source.
Control film mode detection and determine whether the original source of
the input video was film or video.
Advanced
D
escrIptIon
26
— —
Bright Look
100
VIdeo
Bright
Auto
0
2X
Off