Using Adjustment Mode And Settings Mode - Canon GP200 Service Manual

3. OPERATIONS AND TIMING
C. Using Adjustment Mode and Settings Mode
In adjustment mode (*3*; ADJUST) and in settings mode (*5*; OPTION), the settings changed/select-
ed on the control panel are stored in RAM on the image processor PCB and operation/control is execut-
ed according to the settings. (These settings will be stored permanently when the main power switch is
turned off and on after execution.
The factory default settings of adjustment mode (*3*; ADJUST) are recorded in the label (Figure 3-1001).
Be sure to record any new settings if you made changes in the field. Further, you must enter the settings
recorded on the label whenever you have cleared the RAM.
If you replaced the image processor PCB or the composite power supply PCB, be sure to enter the set-
tings recorded on the respective label. (You need not do so when you have replaced only the ROM.)
MF-A6R
MF-A4R
MF-A4
PRI DC (IMG)
PRI DC (on IMG)
DVLP DC (IMG)
DVLP DC (on IMG)
TRNS (IMG)
TRNS (on IMG)
PRI AC (IMG)
PRI AC (on IMG)
AGS GAIN
AGS OFST
PRI DC OFST
PRI AC OFST1
PRI AC OFST2
TRNS OFST
FL OFST
Figure 3-1003 (Service Label; attached behind the front door)
P6L
P6H
P2L
P2H
Figure 3-1004 (Service Label;
attached to the image proces-
sor PCB)
Figure 3-1005 (Service Label; attached to the composite power supply PCB)
3–160
COPYRIGHT © 1996 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
DVLP DC OFST
H-ADJ
V-ADJ
REGIST
RSIDE-SENSHP
PVE-OFST
IC-DENS
CST-LOOP
MF-LOOP
DENS-ADJ
ADJ-S
LASER OFF
PWN 600 MIN
PWM 600 MAX
PWM 200 MIN
PWM 200 MAX
AE-SLOP
FIXER_RESIST
APVC GAIN
APVC OFST
PDC OFST
PAC OFST1
PAC OFST2
ATVC OFST
FL OFST
DDC OFST
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
FILM LANK
ABC_TBL
STRD_ADJ
PPR
W-PLT
TRNS_1
TRNS_2TS
TRNS_2OL