Lower Feeding Assembly; Registration Roller Assembly - Canon GP200 Service Manual

D. Lower Feeding Assembly
1) Remove the inside cover and the pick-up
mount.
2) Set the feeding assembly, i.e., lock it in place.
3) Remove the two screws w, and remove the
front door support (right) q.
Figure 4-417
4) Remove the three screws e, and remove the

lower feeding assembly.

5) Disconnect the connector of the lower feeding
assembly, and remove the lower feeding
assembly.
4
3
Figure 4-418
COPYRIGHT © 1996 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
1
2
5
3
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
E. Registration Roller
Assembly
1. Removing the Registration Roller
1) Remove the following:
• DC controller PCB
• harness guide
• Power supply mount
• Drive unit
• Developing assembly
• Drum unit
2) Remove the screw q, spring w, and two E-
rings e from the rear of the machine.
3
1
Figure 4-419
2
4–23