Canon GP200 Service Manual page 72

3. OPERATIONS AND TIMING
Main motor (M1)
AGC
Fixing heater (H4)
Scanner motor (M2)
Scanner HP sensor (PS1)
Scanning lamp (FL1)
Shading measurement
Cassette pick-up solenoid (SL2)
Pick-up motor (M4)
Vertical path roller clutch (CL3)
Vertical path roller paper sensor (PS8)
Pre-registration paper sensor (PS5)
Registration clutch (CL1)
Primary charging roller bias DC component
Primary charging roller bias AC component
Transfer charging roller
Separation static eliminator
Laser scanner motor (M3)
Laser exposure
Developing bias DC component
Developing bias AC component
Developing clutch (CL4)
Delivery reversing motor (M8)
Delivery sensor (PS13)
Feeding fan (FM1)
Exhaust fan (FM2/FM3)
Laser cooling fan (FM4)
Electrical unit fan (FM5)
Note 1: A key on the control panel is pressed, or an original is placed in the feeder.
Note 2: Varies according to the time set in user mode (quiet mode).
3–18
COPYRIGHT © 1996 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
Main power ON Copy Start key ON
INTR1 STBY INTR2
HP search
Note1
Low-
speed
Low-speed
Low-
speed
Figure 3-115
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
SCFW
SCFW
High-speed
High-speed
High-speed
Control panel power OFF
LSTR STBY SLEEP
Note2