Canon GP200 Service Manual page 268

3. OPERATIONS AND TIMING
7. Registering the Multifeeder Paper Width
Item
Multifeeder paper width basic
value registration
3–214
COPYRIGHT © 1996 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
*4* FUNCTION 07 – > ( )
AD =xxxx
MF-A6R =xxx
MF-A4R =xxx
MF-A4 =xxx
SIZE =xxx.x (mm)
+
1) Place an A6R sheet* in the multifeeder, and
adjust the side guide to A6R.
*A6 is what you obtain folding A4 into four, with its
width being 105 mm.
2) Check the screen to make sure that the VR output
is indicated under 'AD=xxx' as soon as the side
guide is adjusted to A6R.
Then, press 'MF-A6R' to highlight, and press the
OK key.
• The value will be stored under 'MF-A6R'.
3) Likewise, place and A4R sheet in the multifeeder,
and adjust the side guide to A4R.
4) Check to make sure that the AD value has been
indicated; then, press 'A4R' to highlight, and
press the OK key.
• The value will be stored under 'A4R'.
5) Then, place an A4 sheet of paper in the multifeed-
er, and adjust the side guide to A4.
6) Check to make sure that the AD value has been
indicated; then, press 'A4;' to highlight, and press
the OK key.
• The value will be stored under 'A4'.
7) Press the Reset key twice to end service mode.
8) Turn off and then on the main power switch.
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
CANCEL
JUMP
–
OK
Description Reference
page
See P.2-15