Canon GP200 Service Manual page 224

3. OPERATIONS AND TIMING
• Overstacking Alarm (Multitray-12)
Code Nature
02H Overstack The paper being
ing of stacked during
paper multitray operation
has exceeded the
capacity of a sin-
gle bin.
• Partial Fault Alarm (Multitray-12)
Code Nature
10H Partial An error occurred
fault in the bin unit
feeding motor
(M2), bin shift
motor (M1), guide
bar swing motor
(M4), or stapler
swing motor (M5);
the same type of
error has occurred
after turning off
and on the power.
3–170
COPYRIGHT © 1996 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
Cause Operation
Stops upon
detection over-
stacking.
Cause Operation
Prohibits delivery
to the sorter;
however, permits
delivery to the
tray.
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
Display Resetting
Indicates a mes- Remove all
sage on the paper from the
copier's control bin.
panel.
Display Resetting
No indication. Remove the
cause of the
error, and turn
off and then on
the power.