Canon GP200 Service Manual page 225

• Stapler Alarm (Multitray-12)
Code Nature
02H Staple
jam
03H Stapling
safety
protection
mecha-
nism acti-
vation
05H Over sta-
pling
capacity
06H Full sta-
pling
capacity
07H Mixed
paper
sizes
09H Paper in
bin
0AH Staple
absent
COPYRIGHT © 1996 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
Cause
• The stapler Stops stapling.
safety sensor
(MS6) has
turned on for
some reason.
• The stapler is
not securely
installed.
• Normal stapling
operation is not
possible.
The stapler safety Stops stapling.
sensor (MS6) has
turned on during
stapling operation.
The volume of Finishes sorting
paper in a single but stops without
bin has exceeded stapling.
the maximum
value (20 sheets)
in stapler sort
mode.
The volume of Operates nor-
paper in a single mally.
bin has reached
the maximum
value (20 sheets)
in stapler sorter
mode.
Sheets of different Finishes sorting
widths have been but stops without
placed in the bin. stapling.
Paper is remaining Indicates a mes-
inside the bin. sage if stapler
sorter mode is
selected; other-
wise, operates
normally.
The stapler has Prohibits sta-
run out of staples. pling.
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
Operation Display
• Flashes the
Manual Staple
key.
• Indicates a
message on
the copier's
control panel.
No indication.
Indicates a mes-
sage on the
copier's control
panel.
No indication.
No indication.
• Turns on the
Manual Staple
key.
• Indicates a
message on
the copier's
control panel
if stapler
sorter mode is
selected in
this condition.
Indicates the
Add Staple mes-
sage.
3. OPERATIONS AND TIMING
Resetting
• Wait until the
machine auto-
matically
recovers
(about 1 sec
after the sta-
pler safety
sensor turns
off).
• Open and
then close the
stapler cover.
Remove the
cause that
turned on the
stapler safety
sensor (MS6);
wait until the
machine recov-
ers automatically
in about 1 sec
after the stapler
safety sensor
turns off.
Remove all
paper (stack).
Remove all
paper (stack).
Remove all
paper (stack).
Remove all
paper (stack).
Replace the sta-
ple cartridge.
3–171