Canon GP200 Service Manual page 200

3. OPERATIONS AND TIMING
2. Cycle of SLEEP Mode States
Standby
· Composite power supply PCB CPU : ON
· Image processor PCB CPU : ON
· LCD : ON
· Control panel power supply switch : OFF
· Auto sleep : ON, or
· Weekly timer : ON
SLEEP 1 (quick start mode)
· Composite power supply PCB PU : ON
· Image processor PCB CPU : ON
· LCD : OFF
· There is no transmission reservations.
· There is no timer operation reservations
(timer polling, timer reporting).
· There is no reception document.
· There is no document for printing.
· During off-hook
· There is no Printer Board.
All the above conditions exist.
SLEEP 2 (power saving mode)
· Composite power supply PCB CPU : ON
· Image processor PCB CPU : OFF
· LCD : OFF
3–146
COPYRIGHT © 1996 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
Main power switch OFF
Main power switch ON
· Control panel power switch : ON, or
· Off-hook
All functions not requiring operation
are enabled (e.g., timer transmission,
reception, printing).
Incoming call
detection
· Off-hook
· Control panel power switch ON
NO function is available except
FAX reception.
Figure 3-804
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
All functions are enabled.