Yamaha 40 Installation Manual page 136

2. Install:
• Hose guide 1
• Stay 2
• Bolts 3
• Protector 4
Bolt:
8.0 N • m (0.82 kgf • m, 5.9 ft • lb)
NOTE:
Clean the surface of the section a of the tiller
handle, and then affix the protector 4, making
sure that no air is trapped under the protector.
3. Install:
• Tiller handle assembly 1
• Self-locking nuts 2
Self-locking nut:
37.0 N • m
(3.77 kgf • m, 27.3 ft • lb)
4. Connect:
• Wiring harness coupler 1
• Warning indicator coupler 2
NOTE:
Tighten the plastic tie a after connecting the
wiring harness coupler.
127
E