Table of Contents
Advertisement
5.
If you are using Exchange 2007 SP1 or Greater, enter in your Microsoft Exchange Username and Password and press
the Auto-Discover button to initiate an auto-discovery request.
If the auto-discovery process is successful, continue to Step 10 as the settings will be automatically propagated with
the necessary information.
If the auto-discovery process is not successful, you will see the following error message:
If you are using Exchange 2003 or if the auto-discovery request is not successful, continue with the steps below to
manually enter your Exchange details.
6.
Enter the Microsoft Exchange Server name or IP address. For example, "mail.acme.com".
7.
Select Use SSL if your Exchange server utilizes Secure Sockets Layer (SSL) for communication over the Internet.
8.
Select Use Login Credentials if your BluStar 8000i user name and password is the same as your Microsoft Exchange
user name and password.
OR keep this option unselected and manually enter in your Microsoft Exchange Domain (optional for Exchange 2003,
not required for Exchange 2007 SP1 or Greater), Username, and Password.
9.
Select use custom folder name and enter the contact folder name if you want to create a custom folder for your
Microsoft Exchange contacts.
Note:
This option is only available when using Exchange 2003.
10.
Touch the Test button to test the configuration.
If the configuration is successful, there will be a green check mark above the test button (see image above).
If the test failed, you will see an error message similar to the ones below.
If you see an error message, go back and re-enter the fields with the correct information.
LDAP Directory
The BluStar 8000i is able to use a Lightweight Directory Access Protocol (LDAP) server for reading directories over an IP
network. Your system administrator can allow you to edit your own LDAP directory configuration settings, which will over-
ride the configuration coming from the configuration server. You can also configure whether to display both the global
and LDAP directories on your BluStar 8000i or just the LDAP directory.
The LDAP directory has two sets of settings: Server and User. Server settings are set by the administrator. User settings are
configured by the user in the tools menu on the BluStar 8000i UI.
41-001484-11 Rev00 – 09.2013
Application Menu
62
Advertisement
Table of Contents
