Aastra BluStar 8000i Desktop Media Phone User Manual page 63

Hide thumbs Also See for BluStar 8000i Desktop Media Phone:
Table of Contents

Advertisement

Users can also directly enable the Eco-Off power saving mode on their BluStar 8000i by pressing the Eco-Off button
located in the Applications and Telephone Connection Management area of the screen.
To Directly Enable Eco-Off Mode:
1.
Press the Eco-Off button located in the Applications and Telephone Connection Management area of the main screen.
The BluStar 8000i will automatically power down all extraneous hardware components and a screen saver will be
initialized.
To Wake Up the BluStar 8000i from Power Saving Mode:
1.
Touch any part of the screen.
or
Press any key on the BluStar 8000i.
or
Lift the handset.
Note:
If you are not logged in to your account, the fingerprint reader can also be used to wake up the BluStar 8000i from Eco-
Off Mode.
The following progress bar will be displayed on screen:
After powering up, the BluStar 8000i will be ready for normal operation.
Notes:
• If the BluStar 8000i is "woken up" while in Eco-Off mode, the BluStar 8000i will not return to Eco-Off mode until the
next scheduled power saving period.
• If the BluStar 8000i is in an active call or in use at the time Eco-Off mode is set to initialize, Eco-Off mode will be delayed
until the BluStar 8000i is idle.
• The BluStar 8000i will automatically exit Eco-Off mode at the scheduled start of the normal operating/business hours
if a power saving schedule has been configured and the user is logged in.
• Incoming calls will be ignored by the BluStar 8000i if it is in Eco-Off mode. A busy tone will be played back to any callers
and your status will be displayed to others as "Unavailable".
Fingerprint
The biometric fingerprint reader efficiently identifies users and makes Hot Desking from any BluStar 8000i device an
effortless task. A BluStar 8000i terminal can have up to five registered users. If someone wants to use the fingerprint reader
to login to a terminal with more than five registered users, then they have to first delete a user on the fingerprint screen in
order to add their fingerprint.
41-001484-11 Rev00 – 09.2013
Application Menu
58

Advertisement

Table of Contents
loading

Table of Contents