To Configure Auto Answer:
1.
Touch the Auto Answer button.
2.
Select either:
•
Instantly
•
After x Rings (i.e. x = 1-10 rings)
Note:
If you select "Off" you won't be able to configure auto answer for "If in Call or Conference" or "If in Call with Non BluStar
Device".
•
3.
Touch the if in call or conference button.
4.
Select either:
•
Decline New Call and Remain in Old Call
•
Conference New Call Into Old Call
•
Answer New Call and Disconnect Old Call
•
Answer New Call and Put Old Call on Hold
5.
Touch the If in Call with Non BluStar Device button.
6.
Select either:
•
Answer New Call and Disconnect Old Call
•
Decline New Call and remain in Old Call
7.
If you don't have to configure anything else on the screen, touch Done.
To Configure the Maximum Video Data Transmit and Receive Rates
1.
Touch the Max 8000i Transmit button and select the desired rate (i.e. the maximum transmit rate in Kbps when in
calls with BluStar 8000i devices).
2.
Touch the Max 8000i Receive button and select the desired rate (i.e. the maximum receive rate in Kbps when in calls
with BluStar 8000i devices).
3.
Touch the Max H.264 Transmit button and select the desired rate (i.e. the maximum transmit rate in Kbps when in
calls with non-BluStar 8000i devices).
4.
Touch the Max H.264 Receive button and select the desired rate (i.e. the maximum receive rate in Kbps when in calls
with non-BluStar 8000i devices).
5.
If you don't have to configure anything else on the screen, touch Done.
41-001484-11 Rev00 – 09.2013
Application Menu
54