Table of Contents
Advertisement
Application Menu
To Clear Stored Pictures:
1.
Touch the Clear Stored Pictures button.
To Manually Check for Updates:
Notes:
Please contact your system administrator before you upgrade.
1.
Touch the Check for Update button.
2.
Select Restart and Install or Continue if there are no updates available.
3.
If you don't have to configure anything else on the screen, press Done.
To Configure the Power Saving Schedule:
1.
Touch the Power Saving Schedule button.
2.
Under Work Days, touch the buttons corresponding to the days of the week that you are normally at work.
or
Touch the All button if your normal work week consists of all the days of the week.
3.
Under Work Hours, enter the Start and End time of your weekday work schedule by touching the hour (HH) and
minute (MM) fields and using the on-screen keyboard. If your terminal is in 12-hour mode, touch the AM/PM button
to toggle between the two options.
4.
Enter the Start and End time of the your weekend work schedule by touching the hour (HH) and minute (MM) fields
and using the on-screen keyboard. If your terminal is in 12-hour mode, touch the AM/PM button to toggle between
the two options.
or
Touch the Same as Weekdays button if your weekend work schedule is the same as your weekday work schedule.
Note:
The term "weekday" for the Power Saving Schedule feature on the BluStar 8000i refers to the days from Monday to Fri-
day. The term "weekend" refers to Saturday and Sunday.
5.
If you don't have to configure anything else on the screen, touch Done.
57
41-001484-11 Rev00 – 09.2013
Advertisement
Table of Contents
