Fuji Xerox DocuPrint C2535 User Manual page 54

Ready to print
Note
• If you want to change values after you have confirmed them by pressing the <Eject/Set> button (which
has the affix " * "), you need to set them from the start again.
Initializing Configured Values
Display the item you want to initialize and then press both the < > and < > buttons at the
same time.
Once the change process is completed, the factory defaults will be displayed. Press the
<Eject/Set> button to confirm the value.
54
4 Setting on the Control Panel
Continued from previous page
Mode 1
30 mins
10. Press the <Eject/Set> button to confirm your settings. The
settings that have been confirmed are displayed with the
affix " * ".
Mode 1
30 mins *
11. Press the < > button to move one level up.
PowerSaver Mode
Mode 1
12. Press the <Menu> button to quit the menu operation and
return to the print screen.