Table of Contents
Advertisement
40
Glass Frame Removal and Installation
ONE SIDE HAS GLASS LATCHES – ONE SIDE USES
SCREWS – MAKE SURE TO ACCESS THE SIDE WITH
GLASS LATCHES.
A barrier designed to reduce the risk of burns from the hot viewing glass is provided with this
appliance and shall be installed for the protection of children and other at-risk individuals.
If the barrier becomes damaged, the barrier shall be replaced with the manufacturer's barrier for
this appliance.
Do not remove the glass frame with the screen attached – it will not disengage correctly and
may damage the screen.
The appliance must be completely cool before removing the glass.
Do not strike or slam the glass.
Warning: Do not operate appliance with the glass front removed, cracked or broken.
Replacement of the glass should be done by a licensed or qualified service person.
GLASS FRAME TOOL
The glass frame tool is shipped inside the fireplace, under the concealment cover. The first time it is used you
may need to loosen the screw (1/4" wrench). The tool is accessed after removing the screen.
NOTE: Replace the tool in this location after use.
© Travis Industries
Installation
(for qualified installers only)
4140627
100-01353
Advertisement
Table of Contents
