Configuration On Computer - Fuji Xerox DocuCentre 9000 Network Administrator's Manual

Installation Procedure
5
After the machine is restarted, print out the [Printer Settings List] to confirm that the
EtherTalk port is enabled.
For information how to print a setting list, refer to Print Report/List in Chapter 12 of the User Guide.
Configure other EtherTalk settings as necessary. Refer to "EtherTalk" (P.62) for the EtherTalk
configuration.

Configuration on Computer

The following describes the configuration procedure for the computer.
In order to print from the machine, the computer needs to have the print driver installed.
For information about the usable operating systems, refer to "Supported operating systems" (P.17).
Refer to the manual contained in the PostScript 3 Driver Library CD-ROM.
8
53