Configuring The A/D Converter - Sartorius MW1P Service Manual

Configuring the A/D Converter

setup
WP-1
)
10 2 2
)
50
Open the menu access switch
§ Remove the cap that covers the menu access switch on the left-hand side of
the back of the indicator
§ To do this, move the switch to the left (towards the interface connectors).
(„open position")
Menuws-li.JPG
Activate the service mode (see page 48-49)
S
– Select weighing platform and confirm
S
– Menu item »
S
– Menu item »
10 2 1
«
10 2 2
« to enter
Description of the Equipment