Table Of Contents; Intended Use; Configuring The Interface; Parameter Settings (Menu) - Sartorius EA Operating Instructions Manual

Contents
2 Contents
Intended Use
2
2 Configuring the Interface
Parameter Settings (Menu)
3 Data Output Functions
3 Printing a Data Record
5 Interface Description
5 Data Output Format
9 Data Input Format
12 Cabling Diagram
2

Intended Use

The interface can be used to connect
the balance/scale to a computer
(or other peripheral device).
You can use a computer to change,
start and monitor balance/scale functions
and applications.
Available Features
- Type of interface: Serial interface
- Operating mode: Full duplex
- Standard: RS-232
- Transmission rates: 150, 300, 600,
1,200, 2,400, 4,800, 9,600 baud
- Parity: Mark, space, odd, even
- Character format: Start bit,
7-bit ASCII, parity, 1 or 2 stop bits
- Handshake:
2-wire interface: via software
(XON/XOFF)
4-wire interface: via hardware
(CTS/DTR)
- Protocol: SBI (Sartorius Balance
Interface)
- Data output format of the
balance/scale: 16 or 22 characters
Configuring the
Interface

Parameter Settings (Menu)

Please refer to the installation and
operating instructions supplied with
your balance/scale.