Terminals - Eiki EK-130U Owner's Manual

Terminals

① MONO(R/L)
For a mono audio signal (a single audio
jack), connect it to MONO(R/L) jack.
② AUDIO OUT
Connect external audio amplifier to this jack.
③ VGA IN
Connect a computer output to this terminal.
④ HDMI 1 / HDMI 2
This is the terminal to input the HDMI 1 / HDMI
2 signals
⑤ USB-B
This terminal is used to connect the
projector to the computer with a USB cable
when you want to use the "USB Display"
function.(Refer to Page 69-70).
⑥ USB-A
When using the "Memory Viewer" function,
insert the USB memory directly to this
terminal.(Refer to Page 67-68)
⑦ VIDEO IN
This is the terminal to input video signals.
Part names and functions
① ②
⑦
⑧
③ ④
⑨ ⑩
⑧ AUDIO IN
This is the terminal to input computer audio
signals.
⑨ VGA OUT
Output the analog signal form ② to other
monitor.
⑩ RS-232C
When using RS232 to control the projector,
please connect the serial control line to this
terminal.
⑪ Remote Control receiver(BACK)
Operation the projector by remote control.
⑫ LAN
- This is the LAN terminal to connect to the
network.
- Connect the projector to the computer via
RJ45 cable when you use the "Network"
Display function.
⑤ ⑥
⑪
⑫
17