Disconnecting cables
Disconnecting cables
Never unplug a cable by pulling on the cable itself; always take hold of the
actual plug. To disconnect cables, proceed as follows:
Turn off all power and equipment switches.
Remove the cable cover.
Unplug all data communication cables from the sockets of the
data networks.
Unplug all power cables from the grounded-contact utility power
sockets.
Unplug all cables from the devices.
Basic settings
Ex works, the BEETLE /XL is configured to your order. Your configuration
must be adapted subsequently to support additional devices such as
scanners. For more information please contact your WN branch.
GB - 16
Disconnecting cables
The individual POS system
Use your thumb to pull the pla-
stic cover away from the socket
of the Mini DIN connector. This
releases the lock, and the metal
of the Mini DIN connector beco-
mes visible.
Remove the cable from the sok-
ket.