Rider's Seat; Rider's Seat Height Adjustment - Triumph Tiger XRX Owner's Handbook Manual

Rider's Seat

cgig
1. Rider's seat
To remove the rider's seat, remove the
pillion seat (see page 77).
Grasp the rider's seat on either side, and
slide it rearwards and upwards for
complete removal from the motorcycle.
To reinstall the seat, engage the seat's
front rail into the bracket at the rear of
the fuel tank and lower the rear rail in to
the rear brackets. Push down firmly on
the rear of the seat. Reinstall the pillion
seat (see page 77).
Warning
The rider's seat is only correctly
retained and supported once the
pillion seat is correctly installed. Never
ride the motorcycle with the pillion
seat detached or removed, as the
front seat will not be secure and may
move.
A loose or detached seat could cause
loss of motorcycle control and an
accident.
General Information

Rider's Seat Height Adjustment

1
3
cgih
1. Rider's seat
2. Front seat height adjuster
3. Pillion seat height adjuster
4. Low seat height position (rear
shown)
5. High seat height position (rear
shown)
The rider's seat is adjustable for height
by approximately 0.98 in (25 mm).
To adjust the rider's seat:
Remove the rider's seat (see page 79).
Reposition both seat height adjusters to
the higher or lower position as required.
Ensure both adjuster rails are fully
engaged in their brackets on the seat.
Reinstall the rider's seat (see page 79).
1
2
5
4
79