Rebound Damping Adjustment - Tiger Xc; Bank Angle Indicators - Triumph Tiger XRX Owner's Handbook Manual

Rebound Damping Adjustment –
Tiger XC only
X
cgji
1. Rebound damping adjuster
The rebound damping adjuster is located
at the bottom of the RSU and is
accessible from either side of the
motorcycle.
To adjust the rebound damping setting,
rotate the slotted adjuster clockwise to
increase, and counterclockwise
decrease.
Note:
• The setting is measured as the
number of adjuster
counterclockwise from
clockwise (closed) position.
• The Tiger XC model is delivered
X
from the factory with the rebound
adjuster set at the Solo (normal)
riding settings, as shown in the
relevant suspension
page 135).
Maintenance and Adjustment

Bank Angle Indicators

Use of a motorcycle with bank angle
indicators worn beyond the maximum
limit (as described below) will allow the
motorcycle to be banked to an unsafe
angle.
Banking to an unsafe angle may cause
instability, loss of motorcycle control
and an accident.
1
Bank angle indicators are located on the
riders footrests.
Regularly
indicators for wear.
The bank angle indicators have reached
the maximum wear limit and should be
replaced when they have worn down to
a length of 20 mm.
to
turns
1
the fully
cimu_2
chart (see
1. Bank angle indicator
2. Wear limit measurement
Warning
check the bank angle
2
137