Pannier Operation - Triumph Tiger XRX Owner's Handbook Manual

General Information

Pannier Operation

4
3
1. Key slot (shown in the LOCK position)
2. Lock position symbol
3. Unlock position symbol
4. Release position symbol
To unlock and open the pannier, insert
the key and turn it to the UNLOCK
position, then press down on the latch
plate. The lid can then be opened.
1
T0880
1. Lock
2. Latch plate
86
The pannier
positions; the first latch position acts
as a safety catch. Always ensure the
pannier lid is fully closed on to the
2
second latch position, as the pannier
will not fully seal on the first latch
position. Riding the motorcycle with
the pannier lid in this position may
allow water or dust ingress into the
pannier,
pannier contents.
1
Note:
• Due to the effective nature of the
pannier lid seal, reasonable force
may be required to close the lid to
the second latch position.
To close and lock the pannier, close the
lid until the second click is heard. Turn
the key to the LOCK position and remove
it.
The maximum safe load for each
pannier is 11 lbs (5 kg). Never exceed
this loading limit as this may cause the
motorcycle
leading to loss of motorcycle control
and an accident.
2
The two panniers fitted to this
motorcycle are designed to be fitted
as a pair. Never ride the motorcycle
with only one pannier installed. Riding
the motorcycle with one pannier
installed may cause the motorcycle to
become unstable leading to loss of
motorcycle control and an accident.
Caution
lid has two latch
causing damage to the
Warning
to become unstable
Warning