Stands; Side Stand - Triumph Tiger XRX Owner's Handbook Manual

General Information
Rotate the handlebar so that the
alignment marking on the handlebar
aligns with the split line on the upper
clamps/risers.
2
ceic
1. Upper clamp
2. Clamp split line
3. Alignment marking (Tiger XR
shown)
Tighten the 0.39 in (10 mm) fasteners to
26 lbf ft (35 Nm).
Reinstall the 0.31 in (8 mm) fasteners to
the front positions and tighten to
19 lbf ft (26 Nm).
76

Stands

Side stand

1
3
cgiu
1. Side stand
The motorcycle is equipped with a side
stand on which the motorcycle can be
X
parked.
The motorcycle is equipped with an
interlock system to prevent it from
being ridden with the side stand in the
down position.
Never attempt to ride with the side
stand down or interfere with the
interlock mechanism as this will cause
a dangerous riding condition leading
to loss of motorcycle control and an
accident.
Note:
• When using the side stand, always
turn the handlebars fully to the left
and leave the motorcycle in first
gear.
1
Warning