Turn Signal Lights; Cleaning; Care Of Matt Paintwork; Preparation For Washing - Triumph Tiger XRX Owner's Handbook Manual

Turn Signal Lights

Bulb Replacement
celc
1. Indicator lens
2. Securing screw
The lens on each indicator light is held in
place by a securing screw located in the
lens of the light.
Loosen the screw and remove the lens
to gain access to the
replacement.
Maintenance and Adjustment

Cleaning

Frequent,
essential part of the maintenance of
your motorcycle. If regularly cleaned, the
appearance will be preserved for many
years. Cleaning
1
containing an automotive cleaner is
essential at all times but particularly so
after exposure to sea breezes, sea
water, dusty or muddy roads and in
winter when roads are treated for ice
and snow. Do not use
detergent, as the use of such products
will lead to premature corrosion.
Although, under the terms of your
2
motorcycle warranty, cover is provided
against the corrosion of certain items,
the owner is expected to observe this
reasonable advice which will safeguard
against corrosion and enhance the
appearance of the motorcycle.

Care of Matt Paintwork

Matt paintwork requires no greater care
than that already recommended for high
bulb for
gloss paintwork.
• Do not use any polish or wax on
components.
• Do not try and polish out scratches.

Preparation for Washing

Before washing, precautions must be
taken to keep water off the following
places.
Rear opening of the exhausts:
Cover with a plastic bag secured with
rubber bands.
Clutch and brake levers, switch housings
on the handlebar:
Cover with plastic bags.
Ignition switch and steering lock:
Cover the keyhole with tape.
regular cleaning is an
with cold water
household
153