Minimum Recommended Tread Depth - Triumph Tiger XRX Owner's Handbook Manual

Minimum Recommended Tread
Depth
In accordance with
maintenance chart, measure the depth
of the tread with a depth gauge, and
replace any tire that has worn to, or
beyond, the minimum allowable tread
depth specified in the table below:
Under 80 mph 0.08 in (2 mm)
(130 km/h)
Over 80 mph Rear 0.12 in (3 mm)
(130 km/h) Front 0.08 in (2 mm)
Warning
This motorcycle must not be operated
above the legal road speed limit
except in authorized closed-course
conditions.
Warning
Only operate this Triumph motorcycle
at high speed in closed-course on-
road competition or on closed-course
racetracks. High-speed
should only then be attempted by
riders who have been instructed in the
techniques necessary for high-speed
riding and are familiar with the
motorcycle's characteristics
conditions. High-speed operation in
any other circumstances is dangerous
and will lead to loss of motorcycle
control and an accident.
Maintenance and Adjustment
the periodic
Operation with excessively worn tires
is hazardous and will adversely affect
traction, stability and handling which
may lead to loss of control and an
accident.
When
leakage is often very slow. Always
inspect
punctures. Check the tires for cuts,
embedded
objects. Operation with punctured or
damaged tires will adversely affect
stability and handling which may lead
to loss of control or an accident.
Check
deformation and spokes for looseness
and damage. Operation with damaged
or defective wheels, spokes or tires is
dangerous and loss of control or an
accident could result.
Always
Triumph dealer for tire replacement, or
for a safety inspection of the wheels,
spokes and tires.
operation
in all
Warning
tires become punctured,
tires very closely
nails or other sharp
the rims for dents
consult your authorized
for
or
141