Trip Meters; Trip Meter Reset; Information Menu - Triumph Tiger XRX Owner's Handbook Manual

Trip Meters

2
3
1. Trip meter display
2. Trip meter 1 display
3. Trip meter 2 display
Press and release the SET button on the
left hand switch housing until the
desired trip meter is visible.
Press and release the SCROLL button on
the left hand switch housing. The display
will cycle through in the following order:
• Trip distance
• Trip time
• Average fuel consumption
• Average speed.
Each display provides the following
information:
Trip Distance
The total trip distance travelled since
the trip meter was last reset to zero.
Trip Time
The total time elapsed since the trip
meter was last reset to zero.
Average Fuel Consumption
An indication of the average fuel
consumption since the trip meter was
last reset to zero. After being reset the
display
0.1 miles/km has been covered.
Average Speed
The average speed is calculated from
when the trip computer was last reset
to zero. After being reset the display will
show dashes until one mile/km has been
covered.

Trip Meter Reset

1
To reset either of the trip meters, select
and display the trip meter to be zeroed
then press and hold the SET button for
two seconds. After two seconds, all
items within the selected trip meter will
reset to zero.

Information Menu

To access the information menu, turn
the ignition to the ON position. Press
and release the SET button on the left
hand switch housing until InFo appears
in the display screen.
Note:
• InFo will appear in the display screen
for 0.5 seconds to indicate that the
information menu has been selected.
The display screen will then change
to display one of the items listed
below.
Press and release the SCROLL button on
the left hand switch housing. The display
will scroll through the information menu
in the following order when pressing
down on the SCROLL button (it will scroll
General Information
will show dashes until
39