Headlight Dimmer Switch; Turn Signal Switch - Triumph Tiger XRX Owner's Handbook Manual

General Information

Headlight Dimmer Switch

High or low beam can be selected with
the headlight dimmer switch. To select
high beam, push the switch forward. To
select low beam, push the switch
rearwards. When the high beam is
turned on, the high beam indicator light
will illuminate.
1
1. Headlight dimmer switch
Note:
• This model is not equipped with a
lighting ON/OFF switch. The position
light, brake/tail light and license
plate light all function automatically
when the ignition is turned to the ON
position.
• The headlight will only function
when the ignition switch is turned to
the ON position and the engine is
running.
An alternate way to turn on the
headlight, without
running, is to pull in the clutch lever
then turn the ignition to the ON
62
position. The headlight will be on and
remain on when the clutch lever is
released.
The headlight will go off while
pressing the starter button until the
engine starts.

Turn Signal Switch

When the turn signal switch is pushed
to the left or right and released, the
corresponding turn signals will flash on
and off.
1
1. Turn signal switch
The turn signal self-cancel system
becomes active eight seconds after
operating a turn signal. Eight seconds
after turning the turn signal on and
after riding
(65 meters), the turn signal self-cancel
system will automatically cancel the
indicators.
The turn signals can also be cancelled
the engine
manually.
indicators, press and release the turn
signal switch in the central position.
To disable the turn signal self-cancel
system see page 43.
a further 71.1 yards
To manually cancel the