Minimum Recommended Tread Depth; Tire Replacement - Triumph Street Cup Owner's Handbook Manual

Hide thumbs Also See for Street Cup:
Table of Contents

Advertisement

Minimum Recommended
Tread Depth
Warning
Operation with excessively worn tires
is hazardous and will adversely affect
traction, stability and handling which
may lead to loss of control and an
accident.
When
tubeless
punctured, leakage is often very slow.
Always inspect tires very closely for
punctures. Check the tires for cuts,
embedded nails or other sharp objects.
Operation with punctured or damaged
tires will adversely affect motorcycle
stability and handling which may lead
to loss of control or an accident.
Check
the
rims
deformation. Operation with damaged
or
defective
wheels
dangerous and loss of motorcycle
control or an accident could result.
Always
consult
Triumph dealer for tire replacement, or
for a safety inspection of the tires.
In
accordance
maintenance chart, measure the depth
of the tread with a depth gauge, and
replace any tire that has worn to, or
beyond the minimum allowable tread
depth specified in the table below:
Under 80 mph
(130 km/h)
Over 80 mph
(130 km/h)
tires
become
for
dents
or
tires
your
authorized
with
the
periodic
0.08 in (2 mm)
Front 0.08 in (2 mm)
Rear 0.12 in (3 mm)
Maintenance and Adjustment
This Triumph motorcycle must not be
operated above the legal road speed
limit
except
course conditions.
Only operate this Triumph motorcycle
at high speed in closed course, on-road
competition
racetracks.
should only then be attempted by
riders who have been instructed in the
techniques necessary for high speed
riding
and
motorcycle's
conditions. High speed operation in any
or
other circumstances is dangerous and
will lead to loss of motorcycle control
is
and an accident.

Tire Replacement

All Triumph motorcycles are carefully
and extensively tested in a range of
riding conditions to ensure that the
most effective tire combinations are
approved for use on each model. It is
essential
inner tubes (if installed) installed in
approved combinations, are used when
purchasing replacement items. The use
of non-approved tires and inner tubes,
or approved tires and inner tubes in
non-approved combinations, may lead
to motorcycle instability, loss of control
and an accident.
Warning
in
authorized
Warning
or
on
closed
High
speed
are
familiar
characteristics
that
approved
closed
course
operation
with
the
in
all
tires
and
121

Advertisement

Table of Contents
loading

Table of Contents