Table of Contents
Advertisement
The tyre pressures shown on your
instruments indicate the actual tyre
pressure at the time of selecting the
display.
This
may
inflation pressure set when the tyres
are cold because tyres become warmer
during riding, causing the air in the tyre
to expand and increase the inflation
pressure. The cold inflation pressures
specified by Triumph take account of
this.
Only adjust tyre pressures when the
tyres
are
cold
pressure gauge. Do not use the tyre
pressure display on the instruments.
Tyre Wear
As the tyre tread wears down, the tyre
becomes more susceptible to punctures
and failure. It is estimated that 90% of
all tyre problems occur during the last
10% of tread life (90% worn). It is
recommended that tyres are changed
before they are worn to their minimum
tread depth.
differ
from
the
using
an
accurate
MAINTENANCE
Minimum Recommended Tread
Depth
Warning
Riding with excessively worn tyres is
hazardous and will adversely affect
traction, stability and handling which
may lead to loss of control and an
accident.
When tubeless tyres, used without a
tube, become punctured, leakage is
often very slow. Always inspect tyres
very closely for punctures. Check the
tyres for cuts, embedded nails or
other
sharp
objects.
punctured or damaged tyres will
adversely affect motorcycle stability
and handling which may lead to loss of
control or an accident.
Check
the
rims
deformation. Riding with damaged or
defective wheels or tyres is dangerous
and may lead to loss of control and an
accident.
Always
consult
Triumph dealer for tyre replacement,
or for a safety inspection of the tyres.
In
accordance
maintenance chart, measure the depth
of the tread with a depth gauge, and
replace any tyre that has worn to, or
beyond the minimum allowable tread
depth specified in the table below:
Under 80 mph
(130 km/h)
Over 80 mph
(130 km/h)
Riding
with
for
dents
or
your
authorised
with
the
periodic
2 mm (0.08 in)
Front 2 mm (0.08 in)
Rear 3 mm (0.12 in)
151
Advertisement
Table of Contents
