Network Connection - AMX MST-1001 Configuration Manual
Modero s series tabletop touch panel and landscape wall mount touch panel
Hide thumbs
Also See for MST-1001:
- Quick start manual (2 pages) ,
- Instruction manual (48 pages) ,
- Installation & hardware reference manual (38 pages)
Table of Contents
Advertisement
To change the password:
1.
From the Master Connection page, press the Password field to open the Master Password keyboard (FIG. 21).
Master Password keyboard
FIG. 21
2.
Enter the new password in the keyboard field and press OK.
3.
When finished, press Back to return to the Settings page.
Network Connection
The Network Connection page (FIG. 22) controls the configuration of settings for Ethernet communication with the touch panel
Network Connection page
FIG. 22
Network Connection Page
Back:
Connection Status: A green bar signifies that the panel has an active connection to the Master.
Close:
DHCP/Static:
IP Address:
Subnet Mask:
Gateway:
Hostname:
Domain:
Primary DNS:
Secondary DNS:
MAC Address:
Modero S Series Touch Panels - Configuration & Programming Manual
Click the left-facing arrow to return to the previous page.
Click the "X" button to shut the Settings page and return to the main display.
Sets the panel to either DHCP or Static communication modes.
• DHCP is an IP Address assigned to the panel by a DHCP server. If DHCP is selected, the other Network Connection
fields are disabled (see below).
• Static IP is a permanent IP Address assigned to the panel. If Static IP is selected, the other Network Connection
fields are enabled.
Displays the IP address for this panel. If DHCP is enabled, this field will be greyed out.
Displays the subnetwork for this panel. If DHCP is enabled, this field will be greyed out.
Displays the gateway address for this panel. If DHCP is enabled, this field will be greyed out.
Displays the hostname for this panel.
Displays a name to the panel for DNS look-up. If DHCP is enabled, this field will be greyed out.
Displays the address of the primary DNS server used by this panel for host name lookups. If DHCP is enabled, this
field will be greyed out.
Displays the secondary DNS address for this panel. If DHCP is enabled, this field will be greyed out.
This unique address identifies the Ethernet connection in the panel (read-only).
Settings Pages
.
20
Hide quick links:
Advertisement
Table of Contents
