AMX MST-1001 Configuration Manual page 99

Video Performance (Cont.)
Device
3rd Party Solutions
H.264
MPEG2
Modero S Series Touch Panels - Configuration & Programming Manual
Typical Typical
Expected
A/V Sync A/V Sync
Latency -
(offset/ Restart
Typical
hr) Rate
N/A N/A N/A
N/A N/A N/A
Expected
Latency -
Max
N/A Note: Third-party encoders and digital television devices have not been
tested with Modero X Series touch panels, and are not supported by AMX.
The MXA-UENET video accelerator cable (FG5968-74/75/76) is
recommended for this application, especially HD streams.
Network congestion can cause video glitches. We recommend the panel
be installed behind a smart Ethernet switch to filter unintended multicast
packets reaching the panel and consuming panel resources.
We recommend maintaining aspect ratio of source and following usage
guidelines regarding window/button placement.
N/A Note: Third-party encoders and digital television devices have not been
tested with Modero X Series touch panels, and are not supported by AMX.
The MXA-UENET video accelerator cable (FG5968-74/75/76) is
recommended for this application, especially HD streams.
Network congestion can cause video glitches. We recommend the panel
be installed behind a smart Ethernet switch to filter unintended multicast
packets reaching the panel and consuming panel resources.
We recommend maintaining aspect ratio of source and following usage
guidelines regarding window/button placement.
Appendix B: Video Streaming Troubleshooting
Notes:
99