AMX MST-1001 Configuration Manual page 23

4. When the panel is finished scanning for Bluetooth devices, those devices still need to be paired with the touch panel if they
have not done so before. In the search list, select the device to be paired and click Connect (FIG. 28).
Selecting a Bluetooth device
FIG. 28
5. In the Enter Pincode keypad (FIG. 29), enter the device's pincode. The default pincode is 0000.
Enter Pincode keypad
FIG. 29
NOTE: You must enter the pincode within 30 seconds.
6. If a pincode needs to be entered from the device, a System Message popup window appears, requesting that this be done
(FIG. 30).
System Message: Please enter the pincode
FIG. 30
7. Once the pincode has been entered, a new System Message popup window appears, noting that pairing is in progress
(FIG. 31).
System Message: Pairing in progress...
FIG. 31
8. When the pairing is finished, the new device appears on the main Bluetooth page (FIG. 32).
Modero S Series Touch Panels - Configuration & Programming Manual
Settings Pages
23