Changing The Aircoat Nozzle - WAGNER GM 4700AC Operating Manual

VERSION 06/2014
OPERATING MANUAL
7.3.4

CHANGING THE AIRCOAT NOZZLE

Defective AirCoat nozzle!
Insuffi cient paint application quality
Do not use sharp-edged objects to treat carbide on the AirCoat nozzle.
1. Relieve the pressure on the spray gun and product pressure generator.
2. Secure the spray gun with the locking device.
3. Unscrew union nut (A).
4. Remove air cap (B).
5. Press AirCoat nozzle (C) out of air cap (B) by hand and treat with cleaning agent until
all remaining paint has been dissolved.
6. Assembly:
Fit AirCoat nozzle (C) in nozzle seal (D).
7. Fit air cap (B) over nozzle (C). Note the fl attened parts (X) on the nozzle and in the air
cap.
8. Fit the union nut with nozzle guard (A) and tighten by hand.
ORDER NUMBER DOC2311730
NOTICE
D
C
B
A
B_02383
GM 4700AC
x
B_02261
33