VERSION 06/2014
OPERATING MANUAL
2.5
PROCESSIBLE WORKING MATERIALS
Top-coat paints, primer paints, corrosion protection, textured lacquers, lyes, staining
solvents, clear lacquers, separating agents, etc. with a solvent or water base. If you want
to spray working materials other than the aforementioned, please contact a Wagner
representative.
Hot coating products!
Burns
Note:
Please contact your local WAGNER dealer and the lacquer manufacturer if you encounter
application problems.
2.6
REASONABLY FORESEEABLE MISUSE
The forms of misuse listed below may result in physical injury or property damage:
Unauthorized conversions or modifi cations to the system;
Processing dry or similar coating products, e.g. powder;
Using defective components, spare parts or accessories other than those described in
the "Accessories" chapter of this operating manual;
Continuing work with a defective or kinked product hose;
Working with incorrectly set values;
Processing food.
ORDER NUMBER DOC2311730
WARNING
Wear antistatic protective gloves.
When operating the device with a coating product with a
temperature of > 43 °C;109.4 °F, identify the device with a
warning label that says "Warning - hot surface".
GM 4700AC
10