Layout Of The Control Panel - REMEHA Quinta 30 Technical Information

6.1.2 Layout of the control panel

Fig. 03 Control panel
00.W4H.79.00044
a. 'code'-display
Indicates on user level:
Additional indication on
service level:
b. t-display
Indicates:
c. reset-key:
d. 'm' -key:
e. 's'-key:
e. 's'-key + r-symbol:
f. 'e'-key:
f. e-key + k-symbol:
g. [+]-key:
g. [+]-key + q-symbol:
h. [-]-key:
h. [-]- key+ h-symbol:
Table 02 Control panel functions
57117.indd 13 57117.indd 13
operating mode: only one digit 1
setting mode: digit with dot !
read-out mode: digit with flashing dot !
shut-off mode: letter b
forced full load: letter h
forced part load: letter l
speed mode: alternate half digit <
failure mode: flashing digit 1
Temperatures, settings, fault codes (flashing digits),
shut-off codes (flashing dots)
to reset after a lockout condition
Program function: key to select the required mode
Program function: key to select the required program wit-
hin the selected mode
Switch function: burner switch HTG (manual override)
Program function: key to save the settings
Switch function: burner switch DHW (manual override)
Program function: to select a higher setting
Switch function: pump manual override
Program function: to select a lower setting
Switch function: manual override (hand/auto)
13
1-4-2009 14:35:50 1-4-2009 14:35:50