REMEHA Quinta 30 Technical Information page 40

The boiler flow temperature is boosted to the DHW set point + DHW control stop set
point (see Par. 6.6.7 and 6.6.10).
When the DHW sensor or thermostat is satisfied the boiler turns off. The control
powers the three way valve from DHW to HTG or turns off the DHW pump and turns
on the system pump (provided there was still a HTG demand. If no HTG demand, the
selected pump will run on for a maximum of 5 minutes).
A Broag high output indirect calorifier can be connected to the Remeha Quinta 30 in
accordance with the schematic sketch shown (see Fig. 11 and Fig. 12).
Fig. 11 Remeha Quinta with calorifier and three way valve
04W4HHS00003
57117.indd 40 57117.indd 40
Remeha Quinta 30
40
1-4-2009 14:35:52 1-4-2009 14:35:52