Use Of The Control Panel; Control Panel Components; Description Of The Home Screen - REMEHA Quinta Ace 30 Service Manual

3 Use of the control panel

Tab.1 Components in the example
Item Description
CU Control Unit: Control unit
CB Connection Board: Connection PCB
SCB Smart Control Board: Expansion PCB
GTW Gateway: Conversion PCB
MK Control panel: Control panel and display
RU Room Unit: Room unit (for example, a thermo­
stat)
L-Bus Local Bus: Connection between devices
S-Bus System Bus: Connection between appliances
R-Bus Room unit Bus: Connection to a room unit
A Device
B Appliance
C System
Tab.2 Specific devices delivered with the Quinta Ace boiler
Name visible Software ver­
in display sion
CU-GH08 1.12
MK3 1.85
SCB-01 1.3
3 Use of the control panel
3.1

Control panel components

Fig.3 Control panel components
3
4
5 6
3.2

Description of the home screen

6
Description
Control unit CU-GH08
Control panel HMI T-control
Expansion PCB SCB-01
1 Rotary knob to select a tile, menu or setting
2 Confirm button
3 Back button
2
4 Menu button
1
5 Display
6 Status LED
AD-3000932-02
This screen is shown automatically after start-up of the appliance. The
control panel automatically enters standby mode (black screen) if the
buttons are not used for 5 minutes. Press one of the buttons on the control
panel to activate the screen again.
Function
The control unit handles all basic functionality of the appli­
ance.
The connection PCB provides easy access to all connectors
of the control unit.
An expansion PCB provides extra functionality, like an internal
calorifier or multiple zones.
A gateway can be fitted to an appliance or system, to provide
one of the following:
Extra (wireless) connectivity
Service connections
Communication with other platforms
The control panel is the user interface to the appliance.
A room unit measures the temperature in a reference room.
The local bus provides communication between devices.
The system bus provides communication between appliances.
The room unit bus provides communication to a room unit.
A device is a PCB, control panel or a room unit.
An appliance is a set of devices connected via the same L-
Bus
A system is a set of appliances connected via the same S-Bus
Function
The CU-GH08 control unit handles all basic functionality of the
Quinta Ace boiler.
The HMI T-control is the user interface to the Quinta Ace boil­
er.
The SCB-01 provides a 0-10 V connection for a PWM system
pump and two potential-free contacts for status notification.
to confirm the selection
:
Short button press: Return to the previous level or previous
menu
Long button press: Return to home screen
to go to the main menu
7703943 - v.06 - 13122021