Table of Contents
Advertisement
Operation
Press w.
Press q.
[SYSTEM DAYLIGHT VIEW]
You can correct the image to the optimal vividness even if it is projected under a bright light.
1)
Press as to select [SYSTEM DAYLIGHT VIEW].
2)
Press qw or the <ENTER> button.
f The [SYSTEM DAYLIGHT VIEW] individual adjustment screen is displayed.
3)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[1] - [6]
[SHARPNESS]
You can adjust the sharpness of the projected image.
1)
Press as to select [SHARPNESS].
2)
Press qw or the <ENTER> button.
f The [SHARPNESS] individual adjustment screen is displayed.
3)
Press qw to adjust the level.
Operation
Press w.
Press q.
Note
f If you press w while the adjustment value is [+15], the value will become [0]. If you press q while the adjustment value is [0], the value will
become [+15].
[NOISE REDUCTION]
You can reduce noises when the input image is degraded and noise is occurring in the image signal.
1)
Press as to select [NOISE REDUCTION].
2)
Press qw or the <ENTER> button.
f The [NOISE REDUCTION] individual adjustment screen is displayed.
3)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[1]
[2]
[3]
Attention
f When this is set for an input signal with less noise, the image may look different from the original image. In such a case, set it to [OFF].
[DYNAMIC CONTRAST NX]
Light adjustment of the light source and signal compensation are performed automatically according to the image
to make the contrast optimum for the image.
Performs standard correction of the projector to enhance the expressiveness of dark areas while maintaining the
general brightness.
88 - ENGLISH
Chapter 4 Settings — [PICTURE] menu
Adjustment
The intermediate tone becomes brighter.
The intermediate tone becomes darker.
No correction.
Corrects the vividness of the image. The larger the value, the stronger the correction.
Adjustment
Contours become sharper.
Contours become softer.
No correction.
Slightly corrects the noise.
Moderately corrects the noise.
Strongly corrects the noise.
Range of adjustment
-8 - +7
Range of adjustment
0 - +15
Advertisement
Table of Contents
