Rear Roller Replacement - Matrix t3x-03 Service Manual

CHAPTER 9: PART REPLACEMENT GUIDE

9.2 REAR ROLLER REPLACEMENT

1) Remove one of the rear end caps using a Phillips screwdriver (Figure A).
2) Remove both rear roller adjustment screws using an 8 mm Allen wrench (Figure B).
FIGURE A FIGURE B
3) Remove the rear roller from the running belt (Figures C & D).
FIGURE C FIGURE D
4) Reverse Steps 1-3 to install a new roller. NOTE: Be sure to follow the instructions in Section 3.5 to re-tension the running belt.
5) Test the treadmill for function as outlined in Section 9.21.
35