Matrix t3x-03 Service Manual page 53

CHAPTER 9: PART REPLACEMENT GUIDE
9.13 EMERGENCY STOP SWITCH REPLACEMENT - CONTINUED
6) Disconnect the 2 wires plugged into the back of the emergency stop switch (Figure E).
7) Depress the tabs on the top and the bottom of the emergency stop switch (Figure F).
FIGURE E FIGURE F
8) This will allow the emergency stop to be removed from the emergency stop frame (Figure G).
9) Reverse Steps 1-8 to install a new emergency stop switch. NOTE: If replacing the red emergency stop key, be sure to attach the safety clip
string to the red emergency stop key before re-installing it (Figure H).
FIGURE G FIGURE H
10) Test the treadmill for function as outlined in Section 9.21.
50