Heart Grips Replacement - Matrix t3x-03 Service Manual

CHAPTER 9: PART REPLACEMENT GUIDE
9.19 HEART RATE GRIPS REPLACEMENT
1) Turn off power to the treadmill and remove the power cord.
2) Remove the 2 Phillips screws holding the 2 halves of the HR grip together (Figure A).
3) Disconnect the white wire from the bottom HR terminal and remove it (Figure B).
FIGURE B
FIGURE A
4) Disconnect the red wire from the top HR terminal and remove it (Figure C).
FIGURE C
5) Reverse Steps 1-4 to install new HR grips.
6) Test the treadmill for function as outlined in Section 9.21.
56