Download Print this page
Matrix T3XH Service Manual
Hide thumbs Also See for T3XH:

Advertisement

Quick Links

T 3 x H T r e a d m i l l
S e r V i C e m a N U a l

Advertisement

loading

Summary of Contents for Matrix T3XH

  • Page 1 T 3 x H T r e a d m i l l S e r V i C e m a N U a l...
  • Page 2 Product Browse...
  • Page 3 TABLE OF CONTENTS Manager, Engineering & Service Modes Manager, Engineering & Service Modes...
  • Page 7: Preventative Maintenance

    Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. Matrix Fitness Systems will provide service and maintenance training at our corporate facility upon request or in the field if proper arrangements are made. and surrounding areas. Be careful not to hit any of the wire connections.
  • Page 8 CHAPTER 2: Preventative Maintenance Turn off the treadmill with the ON / OFF switch, then unplug the power cord at the wall outlet. • Inspect all assembly bolts of the machine for proper tightness. • Remove the motor cover. Wait for ALL display screens to be off. Clean the motor and lower board area to eliminate any lint or dust particles that may have accumulated.
  • Page 10 T3XH (SIMPLE MODE) CONSOLE DESCRIPTION To display in Simple Mode, go to Service Mode > Setup. The Machine Type must be set to T3xh. GO/STOP: One touch start (displayed on-screen before wo rko ut). Press to end workout and show workout summary data UP/DOWN INCLINE: Adjust incline during workout.
  • Page 17 CHAPTER 3: Console Instruction weight helps to ensure an accurate caloric expenditure rating for each user) using the ARROW KEYS or the NUMBER KEYPAD and press ENTER. 5) Enter the desired start speed using the ARROW KEYS or the NUMBER KEYPAD and press ENTER. 6) Press GO to begin the workout.
  • Page 18 The default stop time can be set at 30, 60 or 90 sec onds and be turned off completely in manager mode. Service technicians can also disable the feature in engineering mode. T1XE, T3XH AND T3XE CONSOLES: These sections allow users to manipulate default settings for the machines. Manager Mode may be accessed by pressing ENTER, 1, 0, 0, 1, Enter on the keypad.
  • Page 19 CHAPTER 4: Manager, Engineering & Service Modes...
  • Page 20 CHAPTER 4: Manager, Engineering & Service Modes...