How to use the control panels of schilling gym equipment: treadmill, ascent trainer (elliptical), upright & recumbent bike and rowing machine (8 pages)
Page 1
Issue Date 2018/4/8 Edition Doc No. JOHNSON Edition Revision Date Page Time Johnson Industries (Shanghai) Co., Ltd T3XM Frame Service Manual Approval Review Editor Kyle Schweitzer Jerry Zhu...
TABLE OF CONTENTS CHAPTER 1: SERIAL NUMBER LOCATION 1.1 Frame Overview.........................1 1.2 Serial Location/Model Type Apply list..................2 CHAPTER 2: PREVENTATIVE MAINTENANCE 2.1 Recommended Cleaning Tips.....................3 2.2 Check for Damaged Parts......................3 2.3 Preventative Maintenance......................4 2.4 Tensioning & Centering the Running Belt..................6 CHAPTER 3: TROUBLESHOOTING 3.1 MCB Instructions........................7 3.2 Troubleshooting - No Power to the Console................
Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. Matrix Fitness Systems will provide service and maintenance training at our corporate facility upon request or in the field if proper arrangements are made. and surrounding areas.
Page 8
CHAPTER 2: PREVENTATIVE MAINTENANCE Clean the motor and lower board area to eliminate any lint or dust particles that may have accumulated. Failure to do so may result in premature failure of key electrical components. Vacuum and wipe down the belt with a damp cloth. Vacuum any black / white particles that may •...
Page 11
CHAPTER 3: TROUBLESHOOTING MCB WIRING INSTRUCTIONS. MCB LED FUNCTION LED No Function Symptom The flashing light represent normal LED 1 LED 1 Flashing communication Flashing once per second, said drive action LED 2 and Power ON, often goes out the Power LED 2 Flashing OFF, normally ON said drive failure LED 3...
CHAPTER 3: TROUBLESHOOTING 3.4 Troubleshooting - No Function for Infrared Induction 1) SYMPTOM: a. Turn on the power switch, but the infrared sensor don’t light up. b. Under the precondition that two infrared sensors light up, start the running belt and put your hand between two sensors, the running belt will not stop within 5 seconds.