Table of Contents
Advertisement
CHAPTER 9: PART REPLACEMENT GUIDE
9.2 REAR ROLLER REPLACEMENT
1) Turn off power and disconnect the cord from the machine.
2) Remove one of the end caps using a Phillips screwdriver (Figure A).
3) Remove both roller adjustment screws using an 8 mm Allen wrench (Figure B).
FIGURE A
FIGURE B
4) Remove the roller from the running belt (Figures C & D).
FIGURE D
FIGURE C
5) Reverse Steps 1-4 to install a new rear roller.
6) Tension the running belt as outlined in Section 3.5.
33
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
