Motor Replacement - Matrix t3x-03 Service Manual

CHAPTER 9: PART REPLACEMENT GUIDE

9.9 MOTOR REPLACEMENT

1) Turn off power to the treadmill and disconnect the power cord.
2) Remove the motor cover as outlined in Section 9.1.
3) Release the drive belt tensioner spring (Figure A).
4) With the spring released, rotate the tensioner to relieve tension on the drive belt (Figure B).
FIGURE A FIGURE B
5) The drive belt can now be walked off of the motor pulley (Figure C).
6) Disconnect the motor cables from the MCB and cut any tie straps holding them in place (Figure D).
FIGURE C FIGURE D
42