Rear Roller Replacement - Matrix T1XE-01 Service Manual

CHaPTer 9: ParT rePlaCemeNT GUide

9.2 rear roller rePlaCemeNT

1) Remove one of the rear end caps using a Phillips screwdriver (Figure A).
2) Remove both roller adjustment screws using an 8 mm Allen wrench (Figure B).
3) Remove the rear roller from the running belt (Figures C & D).
4) Reverse Steps 1-3 to install a new roller.
5) Test the treadmill for function as outlined in Section 9.22.
fiGUre b
fiGUre a
fiGUre C fiGUre d
36